Qwen-Image on RTX 3090: VRAM, speed and fit
Qwen-Image at 8-bit runs on the RTX 3090, about 8.1 min per image.
Image generation · 1328 × 1328
Runs comfortably · on RTX 3090 · 8-bit (FP8 · Q8_0)
- GPU memory
- 20.9 GB
- of 24.0 GB
- Time
- 8.1 min
- per image
Where the memory goes
- Model
- 19.7 GB
- Working
- 347 MB
- Overhead
- 819 MB
- OS
- 0.0 GB
- Free
- 3.1 GB
- Memory
- 20.9 GB of 24.0 GB
- Output
- 1328 × 1328 · 50 steps
- Time
- 8.1 min per image
- Running cost
- $8.65/mo at home · $33/mo on a cloud RTX A5000
Validation: Not validated
| Check | Target | Result | Status |
|---|---|---|---|
| Fits in GPU memory | 24.0 GB usable | 20.9 GB needed | Pass |
| Headroom | 5% free | 3.1 GB free (13%) | Pass |
| Time per image | under 30 s | 8.1 min | Fails |
Targets: an image in under 30 s, and 5% of memory left free. Calculated from published specs, not benchmarked.
The setup
- Model
- Qwen-Image
- Parameters
- 20.4B
- Precision
- 8-bit (FP8 · Q8_0)
- Output
- 1328 × 1328
- Steps
- 50
- Hardware
- RTX 3090
- GPU can use
- 24.0 GB of 24.0 GB
Running cost
- At home
- $8.65/mo
- 395 W at the wall, $0.010 an image
- Renting instead
- $33/mo
- RTX A5000 at $0.27/h, $0.02 an image
4 h a day, power at $0.18 per kWh, cloud at RunPod on-demand prices as of Nov 22, 2026.
Where to get it
Qwen-Image on similar machines
- RTX 4080 SuperRuns
- RTX 5070 TiRuns
- RTX 5080Runs
- Radeon RX 7900 XTXRuns
- RTX 4090Runs
- Radeon AI PRO R9700Runs
- RTX 5090Runs
All machines: Qwen-Image VRAM requirements. Everything that runs here: what can the RTX 3090 run?
Other models that run on RTX 3090
Questions
Can Qwen-Image run on RTX 3090?
Qwen-Image at 8-bit runs on the RTX 3090, about 8.1 min per image.
Report VR-1BWCCUI, calculated Nov 22, 2026 from published specs, not benchmarked.