Skip to content

Qwen-Image 2.1 on RTX 3090: VRAM, speed and fit

Qwen-Image 2.1 at 16-bit runs on the RTX 3090, about 3.5 min per image.

Image generation · 2048 × 2048

Runs comfortably · on RTX 3090 · 16-bit (BF16)

GPU memory
15.1 GB
of 24.0 GB
Time
3.5 min
per image

Where the memory goes

Model
13.3 GB
Working
1.0 GB
Overhead
819 MB
OS
0.0 GB
Free
8.9 GB
Memory
15.1 GB of 24.0 GB
Output
2048 × 2048 · 40 steps
Time
3.5 min per image
Running cost
$8.65/mo at home · $29/mo on a cloud RTX 2000 Ada

Validation: Not validated

What Qwen-Image 2.1 on RTX 3090 was checked against
CheckTargetResultStatus
Fits in GPU memory24.0 GB usable15.1 GB neededPass
Headroom5% free8.9 GB free (37%)Pass
Time per imageunder 30 s3.5 minFails

Targets: an image in under 30 s, and 5% of memory left free. Calculated from published specs, not benchmarked.

The setup

Model
Qwen-Image 2.1
Parameters
7.1B
Precision
16-bit (BF16)
Output
2048 × 2048
Steps
40
Hardware
RTX 3090
GPU can use
24.0 GB of 24.0 GB

Running cost

At home
$8.65/mo
395 W at the wall, $0.004 an image
Renting instead
$29/mo
RTX 2000 Ada at $0.24/h, $0.02 an image

4 h a day, power at $0.18 per kWh, cloud at RunPod on-demand prices as of Nov 21, 2026.

Where to get it

Qwen-Image 2.1 on similar machines

  • RTX 4080 SuperRuns
  • RTX 5070 TiRuns
  • RTX 5080Runs
  • Radeon RX 7900 XTXRuns
  • RTX 4090Runs
  • Radeon AI PRO R9700Runs
  • RTX 5090Runs

All machines: Qwen-Image 2.1 VRAM requirements. Everything that runs here: what can the RTX 3090 run?

Other models that run on RTX 3090

Questions

Can Qwen-Image 2.1 run on RTX 3090?

Qwen-Image 2.1 at 16-bit runs on the RTX 3090, about 3.5 min per image.

Report VR-1PC0GTP, calculated Nov 22, 2026 from published specs, not benchmarked.